FREE SHIPPING
on all orders over $50.00

Aimpoint 3x Magnifier Twistmount (3XMAG-C)

$741.00  $667.00
Save: $74.00 off


Add to Cart:



Overview

The Aimpoint® 3XMag magnifying module is specially designed for compatibility with Aimpoint sights and for maximum flexibility and better performance in the field.

The Aimpoint® 3XMag magnifying module is a high quality optic that can be used with any Aimpoint sight for extended range target identification and engagement. This high quality accessory gives the shooter the best of both worlds: rapid CQB aiming with an Aimpoint sight, and long range target acquisition in combination with the magnifier. The Aimpoint TwistMount allows this transition to occur effortlessly and in just a matter of seconds.

Mechanical Interface

The recommended mount for the 3XMag is the Aimpoint® TwistMount, which allows for quick attachment on any MIL-Std 1913 Picatinny Rail. Check if you need a spacer for co-witnessing with the Aimpoint sight.

The 3XMag can also be attached to aftermarket “flip to side” mounts.

Unique features

  • Mountable on a rail system behind Aimpoint sights
  • Extremely fast and ingenious mounting solution (Twist Mount - Picatinny)
  • Can also be mounted with a regular 30 mm ring
  • Provides extended range to the operator
  • Combines the best of two worlds – CQB & semi-sniping
  • Increases confidence, performance, and flexibility
  • No influence on point of impact – No need for re-zeroing the sight
  • Doubles as handheld magnifying glass monocular.
  • Technical Specifications

    General Specifications
    Art.No: 11324
    Optical Specifications
    Operating principle: Magnifying device
    Optical magnification: 3x
    Aiming dot size: Uses the reticle of the combining sight
    NVD compatible: Yes
    Optical coating: Anti-reflex, all surfaces and multi-layer. NVD-Compatible 1, 2, 3
    Clear aperture: 20 mm
    Eye relief: 60-65 mm at full FOV (40-90 mm at 5° FOV)
    Transmission: >60% (700–1000 nm)
    Resolution: >12 (lp/mrad)
    Dioptric adjustment: Fixed -1.0 D
    Power Source
    Battery type: No power required
    Physical Specifications
    Length sight only: 110 mm (4 5/16")
    Length conf: 110 mm (4 5/16")
    Width: 44 mm (1 3/4")
    Height sight only: 41 mm (1 5/8")
    Weight sight only (incl battery): 200 g (7,1 oz) including rubber cover
    Housing material: High Strength Aluminum
    Housing finish and color: Matte black
    Material mount and spacer std conf: High Strength Aluminum
    Surface treatment: Hard anodized, matte, with protective rubber armor cover
    Height of optical axis - sight and mount: 30 mm (1 3/16") over top surface of Picatinny/Weaver Rail
    Height of optical axis - sight, mount and low spacer: 39 mm (1 9/16") over top surface of Picatinny/Weaver Rail
    Environmental Specifications
    Temperature range operation: -45°C to 71°C (-49°F to 160°F)
    Temperature range storage: -51°C to 71°C (-60°F to 160°F)
    Temperature shock: Operable after a temperature shock between -45°C and +71°C. Duration: 4h of Hot +71°C, 4h of Cold -45°C. Cycling: 3 times
    Humidity: Operates despite humidity. Limits: RH: 95%, Temp: 20ºC to 50 ºC, cyclic
    Immersion, static: Operates after immersion. Limits: Depth: 1 m (3 ft.)
    Shock: Operable before and after shock. Limits: X-axis: 500 g, 0.7 – 1.1 ms (3 shocks), Y-axis: 40g ±4g, 11 ±1ms (2 shocks in each direction, Z-axis: 40g ±4g, 11 ±1ms, 2 shocks in each direction. Functional during exposure (room temperature)
    Vibration: Operates despite vibration. Limits: Vibration, sinusoidal in a frequency range of 10-150 Hz. Frequency: 10-30 Hz, ±1.587 mm, Frequency: 30-150 Hz. 5.75 g, 1 octave/min
    Chemical resistance: Withstands occasional contamination of: Hydraulic oil (FSD 8407, Tryckolja 021), Lubricating oil (FSD 8127, Motorolja 5W/30), Lubricating oil (FSD 8220, Smörjfett 220), Lubricating oil (Break Free), Fuels (FSD 8612, Diesel fuel oil), Solvents/cleaning (FSD)

    Note: Mockingbird Precision is a dealer for Aimpoint. If there is something that you do not see, please contact us for any ordering requirements.


  • Model: 3XMAG-C
  • Manufactured by: Aimpoint